Address
Floor 3, Building B, Honghua Science And Technology Innovation Park,
Longhua District, Shenzhen
Work Hours
Monday to Friday: 9AM - 9PM
Weekend: 10AM - 6PM
Reference architectures of fiber access networks defined by ITU-T Recommendation G.984.1 allow the use of both fiber and copper cables as transmission mediums, with a possible transition between them in the middle of the access loop. This architecture is known…
Take a moment to think about how your Internet usage has changed in the last few years. The average person is doing and expecting a lot more from their Internet like increased interactivity, rich media, and uploading and downloading pictures…
In the optical communication process, it is the access network with light as the transmission medium, replacing copper wire, used to access each home, optical access network (is our home wifi). Optical access network generally has three parts: optical line…
DHCP stands for Dynamic Host Configuration Protocol. It is a protocol layer 7 (application layer). DHCP is widely used in the current network, no matter the enterprise network or the home network. So that terminals can communicate with the Internet,…
Guide 1, ONU indicator description 2、The correct connection of ONU cable 3、ONU troubleshooting 4、Broadband network troubleshooting 5、Broadband and equipment daily precautions 6、Broadband can not access the Internet 7、Slow broadband network speed ONU indicator descriptions ONU indicator light. POWER light: green…
ADSL mainly uses copper cabling and older technologies, while VDSL uses fiber optic components. ADSL can reach up to 20Mbps (in terms of Telkom’s infrastructure, but the technology itself can handle higher speeds) and VDSL can reach up to 40Mbps…
The main function of the optical fiber connector is to quickly connect two optical fibers so that the optical signal can be continuous to form an optical path. The optical fiber connector is movable and reusable, and it is also…
In our daily work, due to personnel changes and network adjustments ，our cabinets will become very messy over time. The placement of equipment in the cabinet, the introduction of power cords, and the management of network cables and communication lines…
