Place of Origin:Guangdong, China
Brand Name:BT-PON
Model Number:BT-711
Type:FTTx Solutions, Multimode
Data interface:4GE
Complies with:2.4GHz and 5.0GHz
Application:FTTH FTTB FTTX Network

Download »

Categories: ,

Product introduction

BT-711GR model ONU is a user terminal device independently developed by BTPT in line with such industrial background.The device has built-in two-layer switching function and three-layer routing function. With compact structure and small appearance, it is a kind of FTTH GPON optical network unit with high performance and low power consumption, which is very suitable for the application requirements of various data services in FTTH networking scenarios of various operators.


Product features

  • Compliance with IEEE 802.3ah & itu-t g.984.x standard
  • GPON:8 T-CONTs,32 GEM Ports
  • Integrate OMCI and TR-069 remote configuration and maintenance
  • Layer 3 Home Gateway/CPE features with Hardware NAT, support Multiple WAN, Route/Bridge mode, etc
  • Layer 2 Switching, support 802.1Q VLAN, 802.1P QOS, Bandwidth Control, Spanning Tree, etc
  • Support PPPoE/ Static IP/ DHCP
  • Bi-directional FEC
  • Support IPv4, IPv6 and IPv4/IPv6
  • Support firewall level Settings, support based on URL/MAC/ IP/ address frame filtering
  • Support multicast IGMP v2 proxy/ snooping, support MLD proxy/ snooping
  • Qos supports PQ, WRR, and CAR queue scheduling
  • Provide Maximum rate 300Mbps 2.4GHz Wireless interface,and Maximum rate 866Mbps 5.8GHz Wireless interface,,4T4R external antenna, support multiple SSID Settings
  • Support DDSN, ALG, DMZ and UPNP
  • Provide POTS interface, support SIP protocol,POTS integrated circuit test complies GR-909
  • Support CATV interface for Video Service,support to turn off CATV functionality


Product Specification

Hardware Specifications
Size(L*W*H)260mm (L) *245mm (W) *35mm (H)
Optical signal access1*GPON
User interface 4GE+2VOIP+2.4G+5G WLAN+1USB+CATV
ButtonPower switch Button, Reset Button, WLAN Button, WPS Button
Power adapter input100V~240V AC,50Hz~60Hz
PowerSupply requirement12V DC,1.5A
Power consumption<15w
Working temperature-10°C ~ +50°C
Environment humidity5% ~ 95% (Non-condensing)
PON Interface
Module typeSC/APC
Working wavelengthPON:up 1310nm,down 1490nm ;CATV:1550nm
TX Optical power value1dBm~5dBm
RX Optical power valueReceiver sensitivity:-28dBm

Overload optical power:-8dBm

Transmission distance0~20km
Transmission rateUplink 1.244Gbps;downlink 2.488Gbps
Ethernet interface
Interface type RJ45
Interface parameters 4*10/100/1000Mbps auto adaptive Ethernet interfaces
Working modeIEEE 802.11 b/g/n/AC
Antenna patternExternal 2*2T2R External antenna
Antenna gain5dBi
Wireless bandwidthSupport 20MHz/40MHz/80MHz
Interface rate2.4G WLAN:Maximum rate 300Mbps

5G WLAN:Maximum rate 866Mbps

SSIDUp to 4 SSID broadcasts are supported
POTS interface
Interface type2* RJ11
Voice agreementSIP
Integrated circuit protocolGr-909 protocol is applicable
CATV Interface
Optical receiving wavelength1550±10nm
Optical reflection loss≥45dBm
RF, WDM, optical power+2~-15dBm
RF frequency range47~1000MHz,  RF output impedance: 75Ω
RF output level78dBuV
AGC range1~-13dBm


Company introduction

Shenzhen Baitong Putian Technology Co., Ltd.has more than 10 years experence in fiber optical equipment industry since from 2008,specializes in the research and development of optical access network technology especially ONU and OLT. It provides integrated network transmission products such as voice, data, and video based on IP networks.

Service Support:

Fully understand the needs of customers, and create value for customers with advanced technology, considerate service, and tailor-made solutions.

Provides customers with a full range of after-sales service and technical support, and strive to create value for customers.

Company Slogan:

To be the most thoughtful and trustable cooperative partner in fiber optical telecommunications worldwide.