BT-125

  1. Place of Origin:Guangdong, China
  2. Model Number:BT-125E
  3. Brand Name:BT-PON
  4. Network end port:1 EPON port
  5. Size:90*90*24mm
  6. Weight:95g
Category: Tags: , ,

Product Introduction

The BT-125G is an FTTH GPON optical network unit with high performance and low power consumption. It provides subscribers with multicast services and enables their access to Internet to cater for the broadband access demands of families.

The BT-125G supports the functions as follows:

1.Uses GPON uplink that is compliant with ITU-T G. 984 series of standards;

2.Supports the configuration of Ethernet interface rates, working modes, MDI/ MDIX auto-negotiation mode, and Pause flow control;

3.Supports packet filtering and protection against illegal message attacks: suppresses unknown unicast, multicast and broadcast packets;

4.Provides performance statistics on all Ethernet lines;

5.Supports IGMP snooping protocol;

6.Supports the L2 wire speed forwarding;

7.Supports the WEB configuration function;

8.Supports the AES-128 algorithm for data encryption of downlink data;

9.Performs various QoS functions: supporting global configuration of queue priority and flexible mapping of 802. 1p value of packets;

10.Supports the PQ queue scheduling mode;

 

Label

Colour

Status

Instruction

Power

Green

Off

The system is not powered up.

On

The system is normally powered up.

PON

Green

Off

The ONU activation procedure is not started.

On

The ONU is already activated.

Blink

The ONU is being activated.

LOS

Red

Off

The received optical power at the equipment is normal.

Blink

The received optical power at the equipment is lower than the optical receiver sensitivity.

LAN

Green

Off

The Ethernet port is disconnected.

On

The Ethernet port is connected normally.

Blink

The data is being transmitted through the Ethernet port.